FAQ's

SIGNAL SEARCH

 

SIGNAL SEARCH

 

1.  Press MENU in the remote control. Set the IRD in the manual scanning.

2.  Ask a helper to watch the signal strength and signal quality in the television screen for indications that you are receiving signal.

3.  Stand behind the dish and holding its outer edges, slowly turn to the left or right (SW) from 42°-56° elevation. Continue turning the dish this way

     until you get the   signal.

4.  When you have a signal, adjust the elevation and azimuth to get the maximum signal strength and signal quality and fix it.

5.  Scan all channels and save it.